V2403 Series

Introduction
The V2403 Series fanless x86 embedded computer is based on the Intel® 3rd gen Core-i™ Series processor, features the most reliable I/O design to maximize connectivity, and supports dual wireless modules, making it suitable for a diverse range of communication applications. The computer’s thermal design ensures reliable system operation in temperatures ranging from -40 to 70°C (with a special purpose Moxa wireless module installed). The V2403 Series supports “Moxa Proactive Monitoring” for device I/O status monitoring and alerts, system temperature monitoring and alerts, and system power management. Monitoring system status closely makes it easier to recover from errors and provides the most reliable platform for your applications.

 

Applications

  • Remote Terminal Unit (RTU)
  • Data acquisition
  • M2M communication (smart gateway)
  • Digital signage
  • Factory automation
  • In-vehicle monitor/data logger (transportation)
  • Programmable router
  • Energy usage optimization
  • Predictive maintenance
  • Asset management

Appearance
Front View

Rear View

V2403 Series

Category:

Features and Benefits

  • Intel® Core™ i Series processor with three performance options
  • -40 to 70°C (system and LTE) operating temperature
  • Dual CFast sockets for storing OS and OS backup
  • Triple mini-PCIe sockets for storage and wireless modules that support mSATA, Wi-Fi, 3G, LTE, GPS, and Bluetooth
  • Variety of interfaces: 4 serial ports, 2 Ethernet LAN ports, 4 DIs, 4 DOs, USB, HDMI, wireless
  • EN 61000-6-2 and EN 61000-6-4 certification  and meets the EMC standard for heavy industry
  • Up to 5 Grms anti-vibration and 100 g/11 ms anti-shock protection
  • Ready-to-run Debian 8, Windows Embedded Standard 7, and Windows 10 Embedded IoT Enterprise 2016 LTSB platforms
  • Moxa Proactive Monitoring utility for system hardware health monitoring
  • Moxa Smart Recovery utility to recover system from boot failure (W7E only)

Certifications

Download Datasheet

View List

Description

Introduction
The V2403 Series fanless x86 embedded computer is based on the Intel® 3rd gen Core-i™ Series processor, features the most reliable I/O design to maximize connectivity, and supports dual wireless modules, making it suitable for a diverse range of communication applications. The computer’s thermal design ensures reliable system operation in temperatures ranging from -40 to 70°C (with a special purpose Moxa wireless module installed). The V2403 Series supports “Moxa Proactive Monitoring” for device I/O status monitoring and alerts, system temperature monitoring and alerts, and system power management. Monitoring system status closely makes it easier to recover from errors and provides the most reliable platform for your applications.

 

Applications

  • Remote Terminal Unit (RTU)
  • Data acquisition
  • M2M communication (smart gateway)
  • Digital signage
  • Factory automation
  • In-vehicle monitor/data logger (transportation)
  • Programmable router
  • Energy usage optimization
  • Predictive maintenance
  • Asset management

Appearance
Front View

Rear View

Specification

Ethernet PortsAuto-sensing 10/100/1000 Mbps ports (RJ45 connector) x 2
Serial PortsRS-232/422/485 ports x 2, software selectable (DB9 male)
USB 2.0USB 2.0 hosts x 4, type-A connectors
Audio Input/OutputLine in x 1, Line out x 1, 3.5 mm phone jack
Digital InputDIs x 4
Digital OutputDOs x 4
Expansion SlotsmPCIe slot x 2
Video OutputDVI-I x 1, 29-pin DVI-I connectors (female)
HDMI x 1, HDMI connector (type A)
Wi-Fi Antenna ConnectorRP-SMA x 2
Cellular Antenna ConnectorSMA x 2
Number of SIMs2
SIM FormatMini
GPS Antenna ConnectorSMA x 1

Isolation3K VDC
ConnectorScrew-fastened Euroblock terminal
Dry ContactOn: short to GND
Off: open
I/O ModeDI
Sensor TypeDry contact
Wet contact (NPN or PNP)
Wet Contact (DI to COM)On: 10 to 30 VDC
Off: 0 to 3 VDC

ConnectorScrew-fastened Euroblock terminal
Current Rating200 mA per channel
I/O TypeSink
Voltage24 to 40 VDC

SystemPower x 1
Storage x 1
LAN2 per port (10/100/1000 Mbps)
Serial2 per port (Tx, Rx)

Baudrate50 bps to 921.6 kbps
Flow ControlRTS/CTS, XON/XOFF, ADDC® (automatic data direction control) for RS-485, RTS Toggle (RS-232 only)
ParityNone, Even, Odd, Space, Mark
Data Bits5, 6, 7, 8
Stop Bits1, 1.5, 2

RS-232TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-485-4wTx+, Tx-, Rx+, Rx-, GND
RS-422Tx+, Tx-, Rx+, Rx-, GND
RS-485-2wData+, Data-, GND

Input Voltage9 to 36 VDC
Power ConnectorTerminal block (for DC models)
Power Consumption (Max.)3.51 A @ 9 VDC
1.39 A @ 24 VDC
0.93 A @ 36 VDC
Power Consumption18 W (max.)

HousingAluminum
IP RatingIP30
Dimensions (with ears)275 x 63 x 154 mm (10.83 x 2.47 x 6.06 in)
Dimensions (without ears)250 x 57 x 154 mm (9.84 x 2.23 x 6.06 in)
Weight2,168 g (4.82 lb)
InstallationDIN-rail mounting (optional), Wall mounting (standard)

Operating Temperature-40 to 70°C (-40 to 158°F)
Storage Temperature (package included)-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity5 to 95% (non-condensing)

EMCEN 55032/24, EN 61000-6-2/-6-4
EMIEN 55032/35, CISPR 32, FCC Part 15B Class A
EMSIEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
IEC 61000-4-6 CS: 1 V
IEC 61000-4-8 PFMF
SafetyEN 60950-1, UL 508, UL 60950-1
ShockIEC 60068-2-27
VibrationIEC 60068-2-64

Green ProductRoHS, CRoHS, WEEE

Time329,398 hrs
StandardsTelcordia (Bellcore), GB

Warranty Period3 years
DetailsSee www.moxa.com/warranty

Models