NE-4100 Series

Introduction
Moxa’s NE-4100 embedded device servers are designed for manufacturers who want to add sophisticated network connectivity to their serial devices. Moxa’s embedded device servers can be used to convert any device with a standard serial interface to an Ethernet-enabled device in no time. The NE-4100 embedded device servers support 10/100 Mbps Ethernet, and provide ready-to-use operation modes, including TCP Server, TCP Client, and UDP. In addition, a Real COM driver is included for backward compatibility with legacy software.

SNMP and Email Alerts for Event Trap and Notification
NE-4100 embedded device servers can be configured to send an SNMP trap or email under the following conditions:

  • Cold/warm start
  • Password authentication failure
  • Change in DSR/DCD line signal
  • Change in IP address
  • Change in password

NE-4100 Series

NE-4100 Series
NE-4100 Series - Image 2
NE-4100 Series - Image 3
Category:

Features and Benefits

  • 10/100 Mbps Ethernet interface
  • Supports baudrates up to 230.4 kbps
  • Choice of operation modes: Real COM, TCP Server, TCP Client, and UDP
  • Supports DHCP, BootP, Static IP, and ARP
  • SNMP and email alerts for event trapping and notifications
  • Half the size of a credit card—only 57 × 40 mm
  • Low power consumption at 1.5 W, with single +5 V input

Certifications

Download Datasheet

View List
Get Quote

Description

Introduction
Moxa’s NE-4100 embedded device servers are designed for manufacturers who want to add sophisticated network connectivity to their serial devices. Moxa’s embedded device servers can be used to convert any device with a standard serial interface to an Ethernet-enabled device in no time. The NE-4100 embedded device servers support 10/100 Mbps Ethernet, and provide ready-to-use operation modes, including TCP Server, TCP Client, and UDP. In addition, a Real COM driver is included for backward compatibility with legacy software.

SNMP and Email Alerts for Event Trap and Notification
NE-4100 embedded device servers can be configured to send an SNMP trap or email under the following conditions:

  • Cold/warm start
  • Password authentication failure
  • Change in DSR/DCD line signal
  • Change in IP address
  • Change in password

Specification

Flash2MB
SDRAM1MB

Configurable DIO Channels (by software)4

10/100BaseT(X) Ports, Auto MDI/MDI-XNE-4120S/4120A: 5-pin pin header
NE-4100T: 26-pin dual-in-line
NE-4110S/4110A: 8-pin RJ45
Magnetic Isolation Protection1.5 kV (built-in)
StandardsIEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3x for flow control

Configuration OptionsWeb Console (HTTP), Windows Utility
ManagementARP, Device Search Utility (DSU), DHCP Client, HTTP, IPv4, SMTP, SNMPv1/v2c, TCP/IP, Telnet, UDP, Web Console, ICMP
Windows Real COM DriversWindows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded
Linux Real TTY DriversKernel versions: 2.4.x, 2.6.x, 3.x, 4.x, and 5.x
Fixed TTY DriversSCO UNIX, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X
Android APIAndroid 3.1.x and later

No. of Ports2 (1 for serial interface, 1 for TTL console port)
Serial StandardsNE-4110S/4120S Series: RS-232
NE-4110A/4120A Series: RS-422, RS-485
NE-4100T Series: TTL
Operation ModesReal COM mode, TCP Client mode, TCP Server mode, UDP mode
Baudrate110 bps to 230.4 kbps
Data Bits5, 6, 7, 8
Stop Bits1, 1.5, 2
ParityNone, Even, Odd, Space, Mark
Flow ControlNone, RTS/CTS, DTR/DSR, XON/XOFF

RS-232TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422NE-4110A/4120A: TX+, TX-, RX+, RX-, GND
RS-485-4wNE-4110A/4120A: TX+, TX-, RX+, RX-, GND
RS-485-2wNE-4110A/4120A: Data+, Data-, GND

Input Voltage3.3 to 5 VDC
Power Consumption 290 mA @ 5 VDC

DimensionsNE-4110/4120: 57 x 40 mm (2.24 x 1.57 in)
NE-4100T: 45 x 36 mm (1.77 x 1.42 in)
WeightNE-4110S/4110A: 40 g (0.09 lb)
NE-4120S/4120A/4100T: 20 g (0.04 lb)
Form Factor TypeNE-4110/4110A/4120S/4120A: Ready-to-go pin header modules
NE-4100T: Drop-in modules

Operating TemperatureStandard Models: 0 to 55˚C (32 to 131˚F)
Wide Temp. Models: -40 to 75˚C (-40 to 167˚F)
Storage Temperature (package included)-40 to 60°C (-40 to 140°F)
Ambient Relative Humidity5 to 95% (non-condensing)

EMCEN 55032/24
EMICISPR 32, FCC Part 15B Class A
EMS IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV
IEC 61000-4-5 Surge: Power: 1 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m
IEC 61000-4-8 PFMF
Environmental TestingIEC 60068-2-1
IEC 60068-2-3
IEC 60068-2-14

Green ProductRoHS, CRoHS, WEEE

TimeNE-4100T: 288,173 hrs
NE-4110S: 290,276 hrs
NE-4110A/4120S/4120A: 289,573 hrs
StandardsTelcordia SR332

Warranty Period5 years
DetailsSee www.moxa.com/warranty

Models

Related products