PT-G503 Series

Introduction
The PowerTrans PT-508 Series is designed to meet the demands of power substation automation systems (IEC 61850-3, IEEE 1613). The PT-508’s optical fiber Fast Ethernet backbone, redundant ring, redundant power inputs (24 VDC or 48 VDC), and isolated power inputs (24 VDC, 48 VDC, or 110/220 VDC/VAC) increase the reliability of your communications and save on cabling/wiring costs. In addition, the DIN-rail and wall-mounting design of the PT-508 switches simplify network planning, and allows greater flexibility by letting you install up to 8 Fast Ethernet ports for power distribution applications.

Additional Features and Benefits

Command line interface (CLI) for quickly configuring major managed functions
VLAN Unaware: Supports priority-tagged frames to be received by specific IEDs
EtherNet/IP and Modbus TCP industrial Ethernet protocols supported
Configurable by Web browser, Telnet/Serial console, CLI, Windows utility, and ABC-01 automatic backup configurator
DHCP Option 82 for IP address assignment with different policies
IGMP snooping and GMRP for filtering multicast traffic from industrial Ethernet protocols
IEEE 802.3ad, LACP for optimum bandwidth utilization
Bandwidth management to prevent unpredictable network status
Multi-port mirroring for online debugging
Automatic warning by exception through email and relay output
RMON for proactive and efficient network monitoring
Automatic recovery of connected device’s IP addresses
Line-swap fast recovery

Cybersecurity Features

User passwords with multiple levels of security protect against unauthorized configuration
SSH/HTTPS is used to encrypt passwords and data
Lock switch ports with 802.1X port-based network access control so that only authorized clients can access the port
RADIUS/TACACS+ allows you to manage passwords from a central location
802.1Q VLAN allows you to logically partition traffic transmitted between selected switch ports
Secure switch ports so that only specific devices and/or MAC addresses can access the ports
Disable one or more ports to block network traffic
SNMPv3 provides encrypted authentication and access security

PT-G503 Series

Category: Layer 2 Managed Switches

Features and Benefits

IEC 61850-3, IEEE 1613 (power substations) compliant
IEC 62439-3 Clause 4 (PRP) and Clause 5 (HSR) compliant
PRP/HSR Coupling and QuadBox functions supported
Ethernet console reserved for local access
Built-in MMS server based on IEC 61850-90-4 switch data modeling for power SCADA
Hardware-based IEEE 1588v2 PTP supported
Design ready for NERC CIP compliant system development
Isolated redundant power inputs with universal 24 VDC, 48 VDC, or 110/220 VDC/VAC power supply range
-40 to 85°C operating temperature range

Certifications

Download Datasheet

Get Quote

Description

Additional Features and Benefits

Command line interface (CLI) for quickly configuring major managed functions
VLAN Unaware: Supports priority-tagged frames to be received by specific IEDs
EtherNet/IP and Modbus TCP industrial Ethernet protocols supported
Configurable by Web browser, Telnet/Serial console, CLI, Windows utility, and ABC-01 automatic backup configurator
DHCP Option 82 for IP address assignment with different policies
IGMP snooping and GMRP for filtering multicast traffic from industrial Ethernet protocols
IEEE 802.3ad, LACP for optimum bandwidth utilization
Bandwidth management to prevent unpredictable network status
Multi-port mirroring for online debugging
Automatic warning by exception through email and relay output
RMON for proactive and efficient network monitoring
Automatic recovery of connected device’s IP addresses
Line-swap fast recovery

Cybersecurity Features

User passwords with multiple levels of security protect against unauthorized configuration
SSH/HTTPS is used to encrypt passwords and data
Lock switch ports with 802.1X port-based network access control so that only authorized clients can access the port
RADIUS/TACACS+ allows you to manage passwords from a central location
802.1Q VLAN allows you to logically partition traffic transmitted between selected switch ports
Secure switch ports so that only specific devices and/or MAC addresses can access the ports
Disable one or more ports to block network traffic
SNMPv3 provides encrypted authentication and access security

Specification

Ethernet Interface

Combo Ports (10/100/1000BaseT(X) or 100/1000BaseSFP+)	3
Console Port	Ethernet console (10/100/1000Mbps RJ45)
Standards	IEEE 802.3 for 10BaseT IEEE 802.3ab for 1000BaseT(X) IEEE 802.3u for 100BaseT(X) and 100BaseFX IEEE 802.3z for 1000BaseSX/LX/LHX/ZX

Ethernet Software Features

Filter	Static Multicast
Power Substation	MMS
Management	Back Pressure Flow Control, BOOTP, DHCP Option 66/67/82, DHCP Server/Client, Flow control, HTTP, IPv4/IPv6, LLDP, Port Mirror, RARP, RMON, SMTP, SNMP Inform, SNMPv1/v2c/v3, Syslog, Telnet, TFTP
MIB	IEC 62439-3 MIB
Redundancy Protocols	HSR, PRP, RSTP grouping
Security	HTTPS/SSL, TACACS+, RADIUS, SSH, Trust access control
Time Management	NTP Server/Client, SNTP, IEEE 1588v2 PTP (hardware-based)

Alarm Contact Channels	Resistive load: 1 A @ 24 VDC
Digital Inputs	+13 to +30 V for state 1 -30 to +3 V for state 0 Max. input current: 8 mA

Power Parameters

Input Current	PT-G503-PHR-PTP-HV: 0.260/0.170 A @ 110/220 VAC PT-G503-PHR-PTP-HV: 0.150/0.080 A @ 110/220 VDC PT-G503-PHR-PTP-WV: 0.660/0.360 A @ 24/48 VDC
Input Voltage	PT-G503-PHR-PTP-HV: Redundant dual inputs 110/220 VAC/VDC (85 to 264 VAC, 88 to 300 VDC)PT-G503-PHR-PTP-WV: Redundant dual inputs 24/48 VDC (18 to 72 VDC)
Overload Current Protection	Supported
Reverse Polarity Protection	Supported
Power Connector	1 removable 5-contact terminal block(s)

Physical Characteristics

Housing	Aluminum
IP Rating	IP40
Dimensions (without ears)	80 x 160 x 110 mm (3.15 x 6.30 x 4.33 in)
Weight	1210 g (2.69 lb)
Installation	DIN-rail mounting

Environmental Limits

Operating Temperature	-40 to 85°C (-40 to 185°F)
Storage Temperature (package included)	-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity	5 to 95% (non-condensing)

Standards and Certifications

EMI	EN 55032 Class A, CISPR 32, FCC Part 15B Class A
EMS	IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 35 V/m IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV IEC 61000-4-5 Surge: Power: 4 kV; Signal: 4 kV IEC 61000-4-6 CS: 10 V IEC 61000-4-8 PFMF IEC 61000-4-11 DIPs
Power Substation	IEC 61850-3, IEEE 1613
Safety	UL 508
Railway	EN 50121-4