MGate 5119 Series

Introduction
The MGate 5119 is an industrial Ethernet gateway with 2 Ethernet ports and 1 RS-232/422/485 serial port. To integrate Modbus, IEC 60870-5-101, and IEC 60870-5-104 devices with an IEC 61850 MMS network, use the MGate 5119 as a Modbus master/client, IEC 60870-5-101/104 master, and DNP3 serial/TCP master to collect and exchange data with IEC 61850 MMS systems.

Easy Configuration via SCL Generator
The MGate 5119 as an IEC 61850 MMS server, typically, requires the import of a SCL file generated by a 3rd party tool. This can be time-consuming and increase costs. To overcome this pain point, MGate 5119 has a built-in SCL generator, which can easily generate SCL files through the web console and make them available almost immediately saving configuration time and cost.

 

Easy Troubleshooting via Traffic Monitor
MGate 5119 Series gateways support Modbus RTU/ASCII/TCP, IEC 60870-5-101, IEC 60870-5-104, and IEC 61850 MMS Protocol Traffic Monitor for easy troubleshooting, especially during the installation stage. It is worth mentioning that traffic logs can be viewed in the popular troubleshooting tool, Wireshark. With this feature, you can easily analyze traffic to determine the root cause of a problem.

MGate 5119 Series

Category:

Features and Benefits

  • Supports IEC 61850 MMS server
  •  Supports DNP3 serial/TCP master
  •  Supports IEC 60870-5-101 master (balanced/unbalanced)
  •  Supports IEC 60870-5-104 client
  •  Supports Modbus RTU/ASCII/TCP master/client
  •  Embedded traffic monitoring/diagnostic information for easy troubleshooting
  •  Built-in Ethernet cascading for easy wiring
  •  -40 to 75°C operating temperature range
  •  Serial port with 2 kV isolation protection
  •  Supports IEC 61850 MMS and DNP3 TCP protocol encryption
  •  Security features based on IEC 62443/NERC CIP
  •  Compliant with IEC 61850-3 and IEEE 1613
  •  Built-in SCL file generator for easy configuration

Certifications

Download Datasheet

Get Quote

Description

Introduction
The MGate 5119 is an industrial Ethernet gateway with 2 Ethernet ports and 1 RS-232/422/485 serial port. To integrate Modbus, IEC 60870-5-101, and IEC 60870-5-104 devices with an IEC 61850 MMS network, use the MGate 5119 as a Modbus master/client, IEC 60870-5-101/104 master, and DNP3 serial/TCP master to collect and exchange data with IEC 61850 MMS systems.

Easy Configuration via SCL Generator
The MGate 5119 as an IEC 61850 MMS server, typically, requires the import of a SCL file generated by a 3rd party tool. This can be time-consuming and increase costs. To overcome this pain point, MGate 5119 has a built-in SCL generator, which can easily generate SCL files through the web console and make them available almost immediately saving configuration time and cost.

 

Easy Troubleshooting via Traffic Monitor
MGate 5119 Series gateways support Modbus RTU/ASCII/TCP, IEC 60870-5-101, IEC 60870-5-104, and IEC 61850 MMS Protocol Traffic Monitor for easy troubleshooting, especially during the installation stage. It is worth mentioning that traffic logs can be viewed in the popular troubleshooting tool, Wireshark. With this feature, you can easily analyze traffic to determine the root cause of a problem.

Specification

Industrial Protocols Modbus TCP Client (Master), IEC 60870-5-104 Client, IEC 61850 MMS Server, DNP3 TCP Master
Configuration Options Web Console (HTTP/HTTPS), Device Search Utility (DSU)
Management ARP, DHCP Client, DNS, HTTP, HTTPS, SMTP, SNMP Trap, SNMPv1/v2c/v3, TCP/IP, Telnet, SSH, UDP, NTP Client
MIB RFC1213, RFC1317
Time Management NTP Client

Authentication Local database
Encryption HTTPS, AES-128, AES-256, SHA-256
Security Protocols SNMPv3
SNMPv2c Trap
HTTPS (TLS 1.3)

Console Port RS-232 (TxD, RxD, GND), 8-pin RJ45 (115200, n, 8, 1)
No. of Ports 1
Connector DB9 male
Serial Standards RS-232/422/485
Baudrate 50 bps to 921.6 kbps
Data Bits 7, 8
Parity Even, Mark, None, Odd, Space
Stop Bits 1, 2
Flow Control RTS Toggle (RS-232 only), RTS/CTS
RS-485 Data Direction Control ADDC® (automatic data direction control)
Pull High/Low Resistor for RS-485 1 kilo-ohm, 150 kilo-ohms
Terminator for RS-485 120 ohms
Isolation 2 kV (built-in)

RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w Data+, Data-, GND
RS-485-4w Tx+, Tx-, Rx+, Rx-, GND

Industrial Protocols Modbus RTU/ASCII Master, IEC 60870-5-101 Master (Balanced/Unbalanced), DNP3 Serial Master

Mode Master
Functions Supported 1, 2, 3, 4, 5, 6, 15, 16, 23
Max. No. of Commands 128

Mode Client (Master)
Functions Supported 1, 2, 3, 4, 5, 6, 15, 16, 23
Max. No. of Server Connections 32
Max. No. of Commands 128

Mode Client
Objects Supported Single point
Double point
Step position
Bit string of 32 bit
Measured value (normalized)
Measured value (scaled)
Measured value (floating)
Integrated totals
Max. No. of Server Connections 32
Max. No. of Information Objects 1200 points

Mode Master (Balanced/Unbalanced)
Objects Supported Single point
Double point
Step position
Bit string of 32 bit
Measured value (normalized)
Measured value (scaled)
Measured value (floating)
Integrated totals
Max. No. of Slave Connections 1 (Balanced), 31 (Unbalanced)
Max. No. of Information Objects 1200 points

Mode Master
Objects Supported Binary inputs
Analog inputs
Counters
Frozen counters
Binary outputs
Analog outputs
Max. No. of Outstation Connections 16
Max. No. of Objects 1200 points

Mode Master
Objects Supported Binary inputs
Analog inputs
Counters
Frozen counters
Binary outputs
Analog outputs
Max. No. of Outstation Connections 16
Max. No. of Objects 1200 points

Mode MMS Server
Max. No. of Client Connections 16
Max. No. of Datasets 99
Max. No. of Reports 99
Max. No. of Data Objects 1200 points

No. of Data Points Supported 1,200 points
microSD Slot Up to 32 GB (SD 2.0 compatible)

Input Voltage 12 to 48 VDC
Input Current 455 mA @ 12 VDC
Power Connector Screw-fastened Euroblock terminal

Contact Current Rating Resistive load: 2 A @ 30 VDC

Housing Metal
IP Rating IP30
Dimensions 36 x 120 x 150 mm (1.42 x 4.72 x 5.91 in)
Weight 517 g (1.14 lb)

Operating Temperature -40 to 75°C (-40 to 167°F)
Storage Temperature (package included) -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)

Safety EN 60950-1, IEC 60950-1, IEC 62368-1, UL 60950-1, EN 62368-1, UL 62368-1
EMC EN 55032/35
EMI CISPR 32, FCC Part 15B Class A
EMS IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 4 kV
IEC 61000-4-6 CS: 10 V/m
IEC 61000-4-8 PFMF: 100 A/m
Freefall IEC 60068-2-32
Shock IEC 60068-2-27
IEC 61850-3 Edition 2.0
Power Substation IEEE 1613, IEC 61850-3
Vibration IEC 60068-2-6, IEC 60068-2-64, IEC 61850-3 Edition 2.0

Time 1,180,203 hrs
Standards Telcordia SR332

Warranty Period 5 years
Details See www.moxa.com/warranty

Models

Related products