IEX-408E Series

Introduction
The IEX-408E-2VDSL2 is an industrial managed Ethernet extender switch for establishing long-distance Ethernet transmissions over twisted-pair copper wiring. IEX-408E-2VDSL2 units can easily be linked in series to form a long-distance multi-drop configuration, with one IEX-408E-2VDSL2 unit located at each drop-point. Adjacent drop points can be separated theoretically by up to 3 km, with a transmission speed of 1 Mbps achieved using a VDSL2 connection (with a connection distance of 300 m, a transmission speed of 100 Mbps can be theoretically achieved). Each IEX-408E-2VDSL2 unit provides six 10/100BaseT(X) and two DSL ports, giving users an incredible amount of flexibility for linking together a wide variety of devices separated by vast distances.

 

Ethernet redundancy is provided by Turbo Ring, Turbo Chain, RSTP/STP, and MSTP, and a controllable bypass solution on the DSL ports that increases system reliability and the availability of your network. The IEX-408E-2VDSL2 Series also supports advanced management and security features. It is the perfect solution for reducing the cost of deploying new network cable installations using existing twisted-pair copper wiring to extend copper cable networks beyond the conventional distance limitations imposed by the Ethernet protocol.

 

The wide operating temperature range (-40 to 75°C), and dual power inputs make it ideal for deployment in industrial applications such as ITS, rail wayside, oil and gas, mining, factory automation, and process automation applications. In addition, its compact design that includes a DIN-rail, makes it ideal for installation in places with space limitations such as a cabinet.

 

To simplify configuration, the IEX-408E-2VDSL2 uses CO/CPE automatic negotiation (the factory default setting). The device will automatically assign CPE status to one of each pair of IEX devices. In addition, advanced management and monitoring functionalities can be performed through a NMS, including a virtual panel, which can improve the user experience by enabling quick troubleshooting.

IEX-408E Series

Category:

Features and Benefits

  • VDSL2 high-speed long-distance copper connections; up to 300 m at 100 Mbps and up to 3 km at 1 Mbps over twisted-pair copper wires
  • Automatic CO/CPE negotiation reduces configuration time
  • Turbo Ring and Turbo Chain on both Fast Ethernet and VDSL2 ports for fast recovery
  • Controllable bypass mode on VDSL2 ports gives higher availability in a daisy-chain topology
  • Flexible deployment with 2-pin or RJ11/45 connector on VDSL2 ports
  • Easy network management by web browser, Telnet/serial console, Windows utility, ABC-02, and MXview

Certifications

Download Datasheet

Get Quote

Description

Introduction
The IEX-408E-2VDSL2 is an industrial managed Ethernet extender switch for establishing long-distance Ethernet transmissions over twisted-pair copper wiring. IEX-408E-2VDSL2 units can easily be linked in series to form a long-distance multi-drop configuration, with one IEX-408E-2VDSL2 unit located at each drop-point. Adjacent drop points can be separated theoretically by up to 3 km, with a transmission speed of 1 Mbps achieved using a VDSL2 connection (with a connection distance of 300 m, a transmission speed of 100 Mbps can be theoretically achieved). Each IEX-408E-2VDSL2 unit provides six 10/100BaseT(X) and two DSL ports, giving users an incredible amount of flexibility for linking together a wide variety of devices separated by vast distances.

 

Ethernet redundancy is provided by Turbo Ring, Turbo Chain, RSTP/STP, and MSTP, and a controllable bypass solution on the DSL ports that increases system reliability and the availability of your network. The IEX-408E-2VDSL2 Series also supports advanced management and security features. It is the perfect solution for reducing the cost of deploying new network cable installations using existing twisted-pair copper wiring to extend copper cable networks beyond the conventional distance limitations imposed by the Ethernet protocol.

 

The wide operating temperature range (-40 to 75°C), and dual power inputs make it ideal for deployment in industrial applications such as ITS, rail wayside, oil and gas, mining, factory automation, and process automation applications. In addition, its compact design that includes a DIN-rail, makes it ideal for installation in places with space limitations such as a cabinet.

 

To simplify configuration, the IEX-408E-2VDSL2 uses CO/CPE automatic negotiation (the factory default setting). The device will automatically assign CPE status to one of each pair of IEX devices. In addition, advanced management and monitoring functionalities can be performed through a NMS, including a virtual panel, which can improve the user experience by enabling quick troubleshooting.

Specification

10/100BaseT(X) Ports (RJ45 connector) 6
Auto negotiation speed
Full/Half duplex mode
Auto MDI/MDI-X connection
Combo Port, RJ-11 (RJ45 connector) or Detachable 2-Contact Terminal Block 2
Standards IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.1X for authentication
IEEE 802.1D-2004 for Spanning Tree Protocol
IEEE 802.1w for Rapid Spanning Tree Protocol
IEEE 802.1s for Multiple Spanning Tree Protocol
IEEE 802.1Q for VLAN Tagging
IEEE 802.1p for Class of Service
IEEE 802.3x for flow control
IEEE 802.3ad for Port Trunk with LACP
ITU G.993.2 for very high speed digital subscriber line transceivers 2

Filter 802.1Q VLAN, Port-based VLAN, IGMP v1/v2, GVRP, GMRP
Industrial Protocols EtherNet/IP, Modbus TCP, PROFINET
Management SNMPv1/v2c/v3, LLDP, Syslog, RMON, DHCP Server/Client, DHCP Option 66/67/82, Back Pressure Flow Control, BOOTP, Flow control, RARP, SMTP, SNMP Inform, Telnet, TFTP
MIB MIB-II, Bridge MIB, Ethernet-like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, RMON MIB Groups 1, 2, 3, 9, RSTP MIB
Redundancy Protocols STP, MSTP, RSTP, Link Aggregation, Turbo Chain, Turbo Ring v1/v2
Security HTTPS/SSL, RADIUS, TACACS+, Port Lock, SSH, Broadcast storm protection, Sticky MAC, NTP authentication
Time Management NTP Server/Client, SNTP

IGMP Groups 256
MAC Table Size 16 K
Max. No. of VLANs 64
Packet Buffer Size 1 Mbits
1.5 Mbits for Fast Ethernet
8 kilobits for DSL
Priority Queues 4
VLAN ID Range VID 1 to 4094

Storage Port USB Type A

LED Indicators PWR1, PWR2, FAULT, STATE
LINK/ACT, CO/CPE, 10/100 (Fast Ethernet port)
MSTR/HEAD, CPLR/TAIL, DSL BYPASS

Console Port USB-serial console (Type B connector)

Ethernet Interface Turbo Ring, Master, Coupler, Reserve

Input Current IEX-408E-2VDSL2-LV Series: 1 A @ 12 VDC, 0.48 A @ 24 VDC, 0.26 A @ 48 VDC
IEX-408E-2VDSL2-HV Series: 0.097/0.05 A @ 110/220 VDC, 0.23/0.149 A @ 110/220 VAC
Input Voltage IEX-408E-2VDSL2-HV Series: 110/220 VDC/VAC (redundant dual inputs)
IEX-408E-2VDSL2-LV Series: 12/24/48 VDC
Operating Voltage IEX-408E-2VDSL2-LV Series: 9.6 to 60 VDC
IEX-408E-2VDSL2-HV Series: 88 to 300 VDC, 85 to 264 VAC
Connection IEX-408E-2VDSL2-HV Series: 1 removable 4-contact and 1 removable 5-contact terminal blocks
IEX-408E-2VDSL2-LV Series: 2 removable 4-contact terminal blocks
Overload Current Protection Supported
Reverse Polarity Protection Supported

Housing Metal
IP Rating IP30
Dimensions 74 x 111 x 135 mm (2.91 x 4.37 x 5.32 in)
Weight IEX-408E-2VDSL2-HV Series: 1260 g (2.78 lb)
IEX-408E-2VDSL2-LV Series: 1230 g (2.71 lb)
Installation DIN-rail mounting, Wall mounting (with optional kit)

Operating Temperature Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature (package included) -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Altitude 2000 m

EMC EN 55032/24
EMI CISPR 32, FCC Part 15B Class A
EMS IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m; Signal: 10 V/m
IEC 61000-4-8 PFMF
Freefall IEC 60068-2-31
Hazardous Locations IEX-408E-2VDSL2-LV: ATEX, IEX-408E-2VDSL2-LV-T: ATEX, IEX-408E-2VDSL2-LV: IECEx, IEX-408E-2VDSL2-LV-T: IECEx
Railway EN 50121-4
Environmental Testing IEC 60068-2-1
IEC 60068-2-2
IEC 60068-2-14
Safety UL 61010-2-201, EN 60950-1 (LVD)
Vibration IEC 60068-2-6
Traffic Control NEMA TS2
Power Substation IEC 61850-3, IEEE 1613

Time 782,910 hrs
Standards Telcordia (Bellcore), GB

Warranty Period 5 years
Details See www.moxa.com/warranty

Models

Related products