EOM-104 Series

Introduction
The EOM-104 Series is designed for device manufacturers who would like to embed Ethernet modules in their products to enhance performance and reliability. The EOM-104 Series provides an easy and cost-effective integrated solution for adding an Ethernet switch module to an existing product.

 

The modules support 10/100M Ethernet transmission and come with Turbo Ring’s fast recovery time of under 20 ms. The EOM-104 Series provides a rich set of peripherals, such as Turbo Ring Enable and GPIO programming pins, and is an ideal solution for embedded Ethernet applications.

EOM-104 Series

Category:

Features and Benefits

  • 10/100BaseT(X) and 100BaseFX Ethernet interfaces
  • Turbo Ring and RSTP/STP for network redundancy
  • SNMP and email alerts for event trapping and notifications
  • Two-thirds the size of a business card
  • Low power consumption
  • -40 to 75°C operating temperature range

Certifications

Download Datasheet

Get Quote

Description

Introduction
The EOM-104 Series is designed for device manufacturers who would like to embed Ethernet modules in their products to enhance performance and reliability. The EOM-104 Series provides an easy and cost-effective integrated solution for adding an Ethernet switch module to an existing product.

 

The modules support 10/100M Ethernet transmission and come with Turbo Ring’s fast recovery time of under 20 ms. The EOM-104 Series provides a rich set of peripherals, such as Turbo Ring Enable and GPIO programming pins, and is an ideal solution for embedded Ethernet applications.

Specification

10/100BaseT(X) Ports (RJ45 connector) 6
Auto negotiation speed
Full/Half duplex mode
Auto MDI/MDI-X connection
Combo Port, RJ-11 (RJ45 connector) or Detachable 2-Contact Terminal Block 2
Standards IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.1X for authentication
IEEE 802.1D-2004 for Spanning Tree Protocol
IEEE 802.1w for Rapid Spanning Tree Protocol
IEEE 802.1s for Multiple Spanning Tree Protocol
IEEE 802.1Q for VLAN Tagging
IEEE 802.1p for Class of Service
IEEE 802.3x for flow control
IEEE 802.3ad for Port Trunk with LACP
ITU G.993.2 for very high speed digital subscriber line transceivers 2

Filter 802.1Q VLAN, Port-based VLAN, IGMP v1/v2, GVRP, GMRP
Industrial Protocols EtherNet/IP, Modbus TCP, PROFINET
Management SNMPv1/v2c/v3, LLDP, Syslog, RMON, DHCP Server/Client, DHCP Option 66/67/82, Back Pressure Flow Control, BOOTP, Flow control, RARP, SMTP, SNMP Inform, Telnet, TFTP
MIB MIB-II, Bridge MIB, Ethernet-like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, RMON MIB Groups 1, 2, 3, 9, RSTP MIB
Redundancy Protocols STP, MSTP, RSTP, Link Aggregation, Turbo Chain, Turbo Ring v1/v2
Security HTTPS/SSL, RADIUS, TACACS+, Port Lock, SSH, Broadcast storm protection, Sticky MAC, NTP authentication
Time Management NTP Server/Client, SNTP

IGMP Groups 256
MAC Table Size 16 K
Max. No. of VLANs 64
Packet Buffer Size 1 Mbits
1.5 Mbits for Fast Ethernet
8 kilobits for DSL
Priority Queues 4
VLAN ID Range VID 1 to 4094

Storage Port USB Type A

LED Indicators PWR1, PWR2, FAULT, STATE
LINK/ACT, CO/CPE, 10/100 (Fast Ethernet port)
MSTR/HEAD, CPLR/TAIL, DSL BYPASS

Console Port USB-serial console (Type B connector)

Ethernet Interface Turbo Ring, Master, Coupler, Reserve

Input Current IEX-408E-2VDSL2-LV Series: 1 A @ 12 VDC, 0.48 A @ 24 VDC, 0.26 A @ 48 VDC
IEX-408E-2VDSL2-HV Series: 0.097/0.05 A @ 110/220 VDC, 0.23/0.149 A @ 110/220 VAC
Input Voltage IEX-408E-2VDSL2-HV Series: 110/220 VDC/VAC (redundant dual inputs)
IEX-408E-2VDSL2-LV Series: 12/24/48 VDC
Operating Voltage IEX-408E-2VDSL2-LV Series: 9.6 to 60 VDC
IEX-408E-2VDSL2-HV Series: 88 to 300 VDC, 85 to 264 VAC
Connection IEX-408E-2VDSL2-HV Series: 1 removable 4-contact and 1 removable 5-contact terminal blocks
IEX-408E-2VDSL2-LV Series: 2 removable 4-contact terminal blocks
Overload Current Protection Supported
Reverse Polarity Protection Supported

Housing Metal
IP Rating IP30
Dimensions 74 x 111 x 135 mm (2.91 x 4.37 x 5.32 in)
Weight IEX-408E-2VDSL2-HV Series: 1260 g (2.78 lb)
IEX-408E-2VDSL2-LV Series: 1230 g (2.71 lb)
Installation DIN-rail mounting, Wall mounting (with optional kit)

Operating Temperature Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature (package included) -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Altitude 2000 m

EMC EN 55032/24
EMI CISPR 32, FCC Part 15B Class A
EMS IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m; Signal: 10 V/m
IEC 61000-4-8 PFMF
Freefall IEC 60068-2-31
Hazardous Locations IEX-408E-2VDSL2-LV: ATEX, IEX-408E-2VDSL2-LV-T: ATEX, IEX-408E-2VDSL2-LV: IECEx, IEX-408E-2VDSL2-LV-T: IECEx
Railway EN 50121-4
Environmental Testing IEC 60068-2-1
IEC 60068-2-2
IEC 60068-2-14
Safety UL 61010-2-201, EN 60950-1 (LVD)
Vibration IEC 60068-2-6
Traffic Control NEMA TS2
Power Substation IEC 61850-3, IEEE 1613

Time 782,910 hrs
Standards Telcordia (Bellcore), GB

Warranty Period 5 years
Details See www.moxa.com/warranty

Models

Related products